Math & Numbers
按 Z' = (N₁/N₂)²·Z = a²·Z 计算变压器阻抗折算。支持副边→原边与原边→副边两个方向，a 可直接输入或由 N₁/N₂ 推得；同时给出导纳 Y=1/Z 与折算后导纳。
用三种语言从你的代码中调用此工具。
curl -X POST 'http://127.0.0.1:3003/zh/api/tools/transformer-impedance-transfer' \
-H 'Content-Type: application/json' \
-d '{"direction":"toPrimary","a":0,"N1":1000,"N2":250,"Z":4,"decimalPlaces":4}'以 JSON 形式 POST 提交输入参数。文件类型参数需先单独上传。
POST http://127.0.0.1:3003/zh/api/tools/transformer-impedance-transfer| 参数名 | 类型 | 必填 | 说明 |
|---|---|---|---|
| direction | select | 否 | — |
| a | number | 否 | Direct turns ratio. If omitted, derived from N₁/N₂ below. |
| N1 | number | 否 | Used to derive a when a is not given directly. |
| N2 | number | 否 | Used to derive a when a is not given directly. |
| Z | number | 是 | Impedance on the source side (secondary for toPrimary, primary for toSecondary). |
将此工具加入你的 Model Context Protocol 服务，让 AI 智能体可以列出并调用它。
将以下内容加入你的 MCP 客户端配置：
{
"mcpServers": {
"elysiatools-transformer-impedance-transfer": {
"name": "transformer-impedance-transfer",
"description": "按 Z' = (N₁/N₂)²·Z = a²·Z 计算变压器阻抗折算。支持副边→原边与原边→副边两个方向，a 可直接输入或由 N₁/N₂ 推得；同时给出导纳 Y=1/Z 与折算后导纳。",
"baseUrl": "http://127.0.0.1:3003/mcp/sse?toolId=transformer-impedance-transfer",
"command": "",
"args": [],
"env": {},
"isActive": true,
"type": "sse"
}
}
}连接到 SSE 端点后，列出已开放的工具：
{
"jsonrpc": "2.0",
"id": 1,
"method": "tools/list"
}通过工具 id 调用，参数由其参数表构建：
{
"jsonrpc": "2.0",
"id": 2,
"method": "tools/call",
"params": {
"name": "transformer-impedance-transfer",
"arguments": {
"direction": "toPrimary",
"a": 0,
"N1": 1000,
"N2": 250,
"Z": 4,
"decimalPlaces": 4
}
}
}有问题或反馈？请联系 [email protected]
| decimalPlaces |
| number |
| 否 |
| — |
JSON 结果
{
"key": {...},
"metadata": {
"key": "value"
},
"error": "Error message (optional)",
"message": "Notification message (optional)"
}