1. Valley top
How to use
AME anchors, B/A chart
Outcome
62Ni highest at 8.7946 MeV; 62Ni−56Fe=4.2 keV per nucleon.
Elysia Tools
Navigation
Physics
Check the semi-empirical mass formula against measured AME2020 data, follow binding energy along the beta-stability valley, and work out how much energy fission releases.
Open static visualizationAt a Glance

Verified Results
Every parameter set and result below is a fixed output of this page's built-in model (each asserted before delivery) and reproduces directly: set the Parameters column in the interactive panel.
| Scenario | Parameters | Result |
|---|---|---|
| Mass valley | SEMF vs AME2020 anchors | 62Ni is the binding-per-nucleon maximum (8.7946 MeV), ahead of 56Fe by ~4.2 keV per nucleon |
| Beta-stability line | A = 56 / 208 / 235 | Z* = 25.2 / 82.5 / 91.3 vs real Fe 26 / Pb 82 / U 92 |
| Fission energy bookkeeping | 235U + n -> 141Ba + 92Kr + 3n | Q = 173.3 MeV; the SEMF symmetric split lands within 8 MeV of the asymmetric truth |
| Reactor energetics | 235U total vs recoverable | 202.5 MeV released, 193.6 MeV recoverable (neutrinos escape with the rest) |
| SEMF blind spot | Q_alpha(235U) | SEMF gives ~0 MeV where reality is 4.68 — the liquid-drop alpha-decay failure, disclosed in-app |
Sources
Papers and datasets underlying this visualization - every formula, algorithm, and data anchor on the page traces back to the sources below.
von Weizsacker C. F. (1935). Zur Theorie der Kernmassen. Zeitschrift fur Physik 96, 431-458.
Meitner L., Frisch O. R. (1939). Disintegration of Uranium by Neutrons: a New Type of Nuclear Reaction. Nature 143, 239-240.
Bohr N., Wheeler J. A. (1939). The Mechanism of Nuclear Fission. Physical Review 56, 426-450.
Related
Next
Myers W. D., Swiatecki W. J. (1966). Nuclear masses and deformations. Nuclear Physics 81, 1-60.
Moller P., Nix J. R., Myers W. D., Swiatecki W. J. (1995). Nuclear Ground-State Masses and Deformations. Atomic Data and Nuclear Data Tables 59, 185-381.
Wang M., Huang W. J., Kondev F. G., Audi G., Naimi S. (2021). The AME 2020 atomic mass evaluation (II). Tables, graphs and references. Chinese Physics C 45(3), 030003.
Kondev F. G., Wang M., Huang W. J., Naimi S., Audi G. (2021). The NUBASE2020 evaluation of nuclear physics properties. Chinese Physics C 45(3), 030001.
Tool usage guide
Why does iron sit at the top of the binding-energy curve while uranium splits in two? One formula answers both questions: the liquid-drop mass model, the sum of five terms — volume, surface, Coulomb, asymmetry and pairing. This page turns each term into a slider and sets it against measured masses.
Binding energy per nucleon B/A follows the semi-empirical mass formula: the volume term grows with A, the surface and Coulomb terms pull it down, the asymmetry term subtracts as N−Z grows, and pairing gives even-even nuclei extra binding. Measured anchors: 62Ni leads at 8.7946 MeV per nucleon, ahead of 56Fe by about 4.2 keV — the well-known near-tie.
The beta-stability line, from the balance between the asymmetry and Coulomb terms, gives Z*(56)=25.2, Z*(208)=82.5 and Z*(235)=91.3, against the real Fe 26, Pb 82, U 92.
| Term | Sign | Physics |
|---|---|---|
| Volume | + | Each nucleon bonds with its neighbours |
| Surface | − | Surface nucleons are less bound |
| Coulomb | − | Proton repulsion ∝ Z²/A^(1/3) |
| Asymmetry | − | The Fermi gas favours N=Z |
| Pairing | ± | Even-even nuclei get extra binding |
Splitting ²³⁵U into ¹⁴¹Ba+⁹²Kr+3n releases Q=173.3 MeV; the SEMF, evaluated for a symmetric split, lands within 8 MeV of that — a coincidence the page discloses as such. The reactor ledger: each fission releases 202.5 MeV in all, of which 193.6 MeV is recoverable (the rest escapes with the neutrinos). The formula's blind spots are shown rather than smoothed over: the SEMF gives Qα(²³⁵U)≈0 where the measured value is 4.68 MeV, and its fission-threshold A lands in [105,125] while the observed onset is about 100.
Where the SEMF fails
Alpha decay (SEMF≈0 against a measured 4.68 MeV) and halo nuclei need shell corrections; the page marks the SEMF residuals against AME2020/FRDM instead of hiding them.
How to use
AME anchors, B/A chart
Outcome
62Ni highest at 8.7946 MeV; 62Ni−56Fe=4.2 keV per nucleon.
How to use
²³⁵U+n→¹⁴¹Ba+⁹²Kr+3n
Outcome
Q=173.3 MeV; 202.5 total / 193.6 recoverable MeV.
Per nucleon, ⁵⁶Fe is where stellar fusion ends, but the top of the AME2020 table is ⁶²Ni (together with ⁵⁸Fe) — the gap is about 4 keV per nucleon, a textbook nuance shown live on the page.
The fragments sit higher on the binding-energy curve: mid-mass nuclei bind more tightly per nucleon, and the Coulomb energy drops when the drop splits.